Tenders Description & Specification for Four Stroke Four Cylinder Diesel Engines Test Bench
Four Stroke Four Cylinder Diesel Engines Test Bench
The Experimental four cylinder diesel engine test stand. The engine used here is a four-cylinder diesel engine. It has its own closed cooling water circuit.
A solid welded frame on rollers carries the entire setup. Hazardous areas such as hot surfaces and rotating parts are covered with perforated plates. The connection to the brake is made via a rotationally elastic coupling with a jointed shaft. The engine is attached to the load unit by fasteners.
发动机安装了传感器,测量temperatures and the cooling water flow rate. The switch cabinet contains all of the electronic equipment for managing the engine (factory set). On the switch cabinet are an ignition key, an operating time counter and warning lamps. Data is transferred between the load unit and the engine via a data cable connecting the switch cabinets for the two units. A starter battery is also housed in the frame.
For safety reasons, the engine has been modified in a way that it only starts when it is connected to the load unit both mechanically and electrically.
FEATURES:
SPECIFICATIONS:
Engine : Branded CRDI Version
Max.Power : 74 BHP @ 4000 rpm
Max.Torqe :190Nm @ 2000 rpm
Fuel : diesel
No of cylinders : Four
Bore : 69.9 mm
Stroke length : 82 mm
Starting : Self-start
Working stroke : Four strokes
Cooling : Water-cooled
Capacity : 1248 cc
Battery : 12V, 45A
Alternator : 12V, 45A
Engine oil : SAE 5W-30
Power required :230V, 50Hz, 1 phase
DIMENSIONS AND WEIGHT:
Ltekonline are the manufacturers of Four Stroke Four Cylinder Diesel Engines Test Bench used to demonstrate engineering principles in Engineering Colleges, Engineering Schools andThermal Engineering lab Equipmentfor Engineering Teaching Lab in Universities
